Changing Thermostat Setpoints

Many corporate offices limit the setpoints of your HVAC units as well as the amount of adjustment that is able to be made. This is often set to +/- 2 degrees but varies by customer. If you find you are hitting lockout limits or are unable to adjust your thermostats, please contact us so we can verify the lockout settings for your location and assist in temporary overrides.

Open

To adjust the setpoints:

1. Press the Up or Down arrow keys

2. Choose the temperature setting you’d like, it will adjust 1 degree at a time.

3. Press the Done button (first from the left)

! If the System Mode is OFF, pressing either the Up or Down buttons will take you
to the System Mode screen. You must first set an operating mode before you can
set or change the setpoint

! To change the Heat Setpoint you must be in the Heating mode, to change the Cool
Setpoint you must be in the Cooling mode. If you are in Auto mode, the mode of the
last system call will be the setpoint screen displayed.

Setpoint Push: Note that you cannot lower the cooling setpoint below the heating
setpoint. The thermostat will "push" the heating setpoint lower if you try to lower the
cooling setpoint below the heating setpoint. It maintains a 3 degree separation between
the heating and cooling setpoint. The same is true for raising the heating setpoint above
the cooling setpoint. Again the thermostat will "push" the cooling setpoint up to maintain
the 3 degree separation.