This product support bulletin was issued July 20, 2021
SUBJECT: Module to Direct Dock Connection
The first production run of direct docks had an assembly stack up which may cause the connectors not to mate properly in rare cases.
SOLUTION:
Remove the wireless module from its dock by unscrewing two #10 screws. |  |
Identify the dock version.
Version A: Continue to the next step of this procedure
Version B: STOP. This procedure does not apply. |   |
Using a small screwdriver, peel off the gasket from the dock and discard. |  |
Replace the wireless module. Secure with two #10 screws. |  |
Reboot equipment |
|