🪛 WiTemp+ Installation Basics
The WiTemp+ sensor includes an onboard temperature sensor. To install using onboard temperature sensor, simply open the top of the sensor and insert the batteries.
AA Lithium batteries required, pair included. WiTemp+ can be mounted with zip ties, Velcro straps, magnetic tape or screws, not included.
Mount WiTemp+ vertically.
For best signal strength to gateway, mount gateway vertically as well.
🪛 WiTemp+ External Sensors
The WiTemp+ can accommodate a single 1-wire sensor or a signal contact closure or pulse outut device.
After 1-wire sensor is connected, cycle power of Witemp+.
Additional Installer App configuration needed for contact closure or pulse device.