When setting up a ConnectWare® Module without a Secure Access Point (SAP), you will need to reference the serial number of the module. The image below highlights where to find the serial number. The reference image is for a CWM version 2. Connecting via Wi-Fi is possible with a CWM version 1, but it does not have a port for Ethernet.
...
Installation Steps:
Align the connector between the module and the ConnectWare® Dock or ConnectWare® Cable Adapter.
Secure with two screws.
...
Enter the network credentials into the touchscreen of the connected device. Instructions for navigating through the equipment’s user interface should be provided by the original equipment manufacturer.
If the module will be connecting using Ethernet:
...