Page Comparison

...

The install begins before you’re even on site. Read on to see what you need to do before and when you arrive at an install.

📝 PRE-ARRIVAL

1. Communicate w/ with PhD on timing of visit

2. Validate all hardware is available to technician and sufficient spare stock

3. Verify installer has the following paper documents – leave behind document, floorplan layout

4. Make sure you have downloaded the SiteSage Install App

...

 ARRIVAL

1. Arrive on site

2. Check in to site via Open Kitchen Open SiteSage Install Mobile App

   Need to Sign in the installer app on your phone

   when you arrive at the site.

3. Page should show “Select Location” on top and you will have a drop down of customers.

4. You need to tap

   Tap the carrot on the right to get a list of customers. Select the customer's name and tap “Confirm” button.

5. In the search bar enter the store name or number - the store should show below. Tap the location and confirm you are on site. The Main install page will

   show. Use the green “+ add Device” to add equipment to location and upload photos to the app.

   display

6. Check in with MOD Manager On Duty or gain access to location via security / lockbox (depending on customer preference).

7. Walk location, identify install locations.

8. Verify access to electrical panels and rooftop (if required), inspect panels for safety concerns (water, traffic, stacked product / boxes, etc.).

...