Page Comparison

There are many different ways to connect equipment to the Open Kitchen platform. The most common approach is to use a Secure Access Point (SAP) and ConnectWare Module (CWM) to create a quick and secure connection while automating much of the provisioning process. In some instances, the equipment does not need a CWM and can connect to the SAP directly.

In the event that the location’s IT team does not want to have an SAP in place, there are other methods of connection. The location’s IT team can emulate the functions of the SAP on their own infrastructure/access point. Some equipment is capable of connecting a CWM to Wi-Fi without an SAP or other access point. ConnectWare Modules that connect via Ethernet cables are available. Also, some equipment is capable of connecting to the Open Kitchen cloud without any additional hardware present.

...

Page Tree
root @self expandCollapseAll true startDepth 1 searchBox true

Connecting equipment to Open Kitchen is generally a fairly simple process.

1. Identify how you’re connecting the equipment to the internet.

2. Connect the relevant hardware.

3. Verify connectivity if possible.

4. Record important piece of information.

At present, there are only 3 potential pieces of hardware from Powerhouse Dynamics that might be involved in connecting the equipment to the internet. If you were provided any of the hardware pictured below, please refer to the relevant pages for specifics on how to connect them.

Secure Access Point (SAP)

Image Added

ConnectWare Module 1 (CWM1)

Image Added

ConnectWare Module 2 (CWM2)

Image Added

If you are installing the Secure Access Point and either style of ConnectWare module, please refer to
https://sitesage.atlassian.net/l/cp/4Pv4cee1

If you are connecting using a ConnectWare Module without a Secure Access Point, please refer to
https://sitesage.atlassian.net/l/cp/0SFFur0u