...
The Open Kitchen Secure Access Point (SAP) is configured for DHCP network connection by default. But if the SAP is running firmware > rev 1.0.0, it can be reconfigured for a static IP address:
Power on the SAP.
Once it has booted up (about 2 minutes), change the position of the toggle switch. The actual position does not matter. There is no polarity. We are just tracking state change here.
...
• You should now see a network broadcasting with the SSID “ConfigSiteSageSAP”. If you do not, please wait a minute and flip the switch to the other position.
• Connect to the ConfigSiteSageSAP network. The password is the SAP S/N found on the back of the device.
...