ConnectWare Module to Dock Installation
- Ricky Goldfarb
Owned by Ricky Goldfarb
Using a Philips screwdriver, remove and retain the two screws holding the plastic cover exposing the connector and gasket. Discard the cover.
Dust Cover Removal
Align the ConnectWare Module to the Dock and re-attach the two screws. Tighten screws until they bottom out. Do not over-torque.
If the plastic threads are stripped, the screw can be replaced with a longer #10 screw or purchase long plastic screws from https://sitesage.atlassian.net/wiki/x/CgAxGg
Module Assembly