CWM Factory Reset Instructions

ConnectWare Module 1 (There will be 2 grooves on the face of this module).

• Locate the pinhole on the module. It should be around the corner from the lights.

• Take a paper clip or similar skinny object and gently tap the button inside the pinhole.

• Do NOT hold the button.

• The lights will flash.

• Wait for a solid orange light, and then gently press the button a second time.

• It will take a few minutes to complete the reboot.

ConnectWare Module 2 (There is an Ethernet port on this version that may be covered by a cap.)

• Locate the pinhole the module. It should be next to the lights.

• Take a paper clip or similar skinny object and gently tap the button inside the pinhole.

• Do NOT hold the button.

• The lights will flash.

• Wait for a solid orange light, and then gently press the button a second time.

• It will take a few minutes to complete the reboot.