Versions Compared

Version Old Version 4 New Version Current
Changes made by

Ricky Goldfarb

Jim Higgins

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Provisioning Endpoint

  • Push Endpoint

  • Pull Endpoint

An endpoint may be a DNS name such as prov.myserver.com or an IPv4 dotted decimal address such as 120.23.88.190

Note

All three end points must be configured at the same time. If any end point is left unconfigured, CWM will default to the Open Kitchen end points upon reset.

Manual Configuration using a PC

A Connectware2 module can be manually configured using the Open Kitchen Equipment (OKE) Simulator. A ConnectWare Dock and a USB-A to USB-A cable are required to connect the CWM to the PC.

https://sitesage.atlassian.net/wiki/x/PYAcHQ

https://sitesage.atlassian.net/wiki/x/X4D3H

Using the OKE Simulator

View file
nameoke.zip
(oke.exe on a Windows PC) in a command terminal and a CWM connected to the PC as an example, the following menu options appear when pressing the Enter button.

...

It is recommended to reboot the CWM after these changes are made for the CWM to begin connecting to the new endpoints.

Info

For

...

detailed instructions on using the simulators, see https://sitesage.atlassian.net/wiki/x/FYBWHQ for full instructions.

Info

An example of a custom endpoint server can be demonstrated using

https://sitesage.atlassian.net/wiki/x/HwBYHQ