Equipment Interface
...
SERIAL/POWER Connector mates with Molex receptacle 0430251008 or similar with tin plated contacts.
Power Requirements
ConnectWare2 requires a minimum 1W DC power supply. It can be powered either by
USB @ 5V
...
5V DC power supply on Molex connector pin 1 with pin 5 as ground reference
5-24V DC power supply on Molex connector pin
...
6 with pin 5 as ground reference
...
Equipment Serial Interfaces
...
Ethernet Option
10/100Mbit RJ-45
Recommend using CAT5E shielded cable.
...
The top side of the PCB is conformally coated with silicone. The reset button is IP67 sealed.
The standard configurations without battery backup have a maximum operating temperature of 85°C.
With the battery backup option installed, the maximum operating temperature is 70°C.